+86-22-66321865

Medical Protective Respirator

  • Info:

    Composition: spunbond outer layer, high efficiency meltblown middle filter layer, with adjustable nose clip and flexible band ear-loop.
    Performance: in accordance with GB19083-2010 standard (CHINA MEDICAL PROTECTIVE RESPIRATOR STANDARD),

  • Introduction

    • Info:
    Composition: spunbond outer layer, high efficiency meltblown middle filter layer, with adjustable nose clip and flexible band ear-loop.
    Performance: in accordance with GB19083-2010 standard (CHINA MEDICAL PROTECTIVE RESPIRATOR STANDARD),
    • Share:
    • Introduction
    Product name:  Medical Protective Respirator
    Product code: TDN95-Z01
    Composition: spunbound outer layer, high efficiency meltblown middle filter layer, with adjustable nose clip and flexible band ear-loop.
    Performance: in accordance with GB19083-2010 standard (CHINA MEDICAL PROTECTIVE RESPIRATOR STANDARD), efficiency meet to class 1(>=95%)
    Application: For use in a medical environment to provide a physical barrier against airborne                particulates as well as blood and other bodily fluids.
    Note:
    1. This product is disposable. Please check the package before use. If the package is damaged, it should not be used. Please use as soon as possible after opening.
    2. Please refer to the instructions before use. Avoid hand contact with the inside of the mask.
    3. It is recommended to use for 4 hours and replace any time when polluted or wet.
    4. The discarded mask should be treated as medical waste and should be descrded appropriately.
    5. Please stop using immediately if you feel unwell during use.
    Storage conditions: store in a room with relative humidity no more than 80%, no corrosive gas and good ventilation, and keep away from pollution sources.
    Contraindications: those who are allergic to non-woven fabrics should be careful.
    Production date:See inner package seal
    Shelf life:one year
    Manufacturer / Registrant / After-sales Service Unit:
    TIANJIN TEDA FILTERS CO.,LTD
    Address of manufacturer:
     No.45, The 7th Xinye Street, West Zone of TEDA, Tianjin, China
    Manufacturer Contact:
    Tel: 86-22-66321865
    Fax: 86-22-66321877
    Postcode: 300462
    Website: www.tedafilters.com

Copyright:TEDA Filters Co., Ltd. All reserved 2016